high power contact

The high-current contact sockets carry the part number 4580 at Lumberg, The single-pole and tin-plated contact sockets of the smaller version 4580 03 mate with tab contacts of 5.3 mm x 0.8–1.5 mm or up to 5.3 mm x 1.5–2.0 mm. Depending on the PCB layout or the lead frame, rated currents (at Tamb 20 °C) up to 60 A with contact resistance < 0.5 mm? can be realized. In the larger version 4580 04, tab contacts up to 8 mm can be mated, then at rated currents up to 80 A with contact resistance < 1.0 mm?.

量产

electronic drive, motor

Rast 1.5 connector

Direct and indirect mating, for cable-to-board connections in insulation displacement technology. Keying according to RAST 1.5 standard avoids mismating. For signal and low load currents up to 3 A, pitch 1.5 mm (.059").

小批量

electronic drive

RAST 7.5

One of the new areas of application for the RAST 7.5 Power? connector, which is designed for rated currents of up to 25 amperes at Tamb 85 °C and a rated voltage of 500 volts, is electric vehicles with a higher than standard 12-volt on-board voltage. Lumberg is now responding to the increased fields of application by expanding the product range with new pole numbers. The power connector with external locking, which is now indirectly mating onto a 2 to 5-pole upright tab header and is now also available with 1 to 4 poles, can be placed consecutively without loss of pitch. The keying option of these connectors allows for fool-proof mating. With a pitch of 7.5 mm (0,295″) this connector is designed for AWG 14 (≈ 2.5 mm2) conductors with an insulation diameter of up to 3.6 mm (0,142″). Contact springs are silver-plated, and the connector terminates by insulation displacement technology (IDT). The RAST 7.5 Power? connector is applicable in a temperature range from -40 to +130 degrees centigrade.

量产

drive